How to Choose Critical Loads for Battery Backup
A battery can hold plenty of energy and still leave you frustrated in a blackout if the wrong circuits are connected. To choose critical loads properly, start with what your household genuinely needs to keep running when the grid goes down - not every appliance you use on a normal day.
For most Adelaide homes, a well-designed backup circuit delivers more confidence than trying to power the entire switchboard. It keeps the essentials live, protects your battery from being drained by high-demand appliances and can reduce the cost of the backup setup. The right answer depends on your family, your inverter, whether your home is single-phase or three-phase, and how long you want to ride through an outage.
What are critical loads?
Critical loads are the circuits your solar battery system supplies during a grid outage. They are connected to a dedicated backup board or protected circuit arrangement, allowing a compatible hybrid inverter and battery to keep powering them after it disconnects safely from the grid.
This is different from using a battery to lower your daily bill. Many battery systems can discharge at night or charge during free electricity periods, but not all provide blackout backup. Backup capability depends on the inverter, battery configuration, installation design and the selected circuits. If outage protection matters, raise it before installation rather than assuming it is included.
A practical critical-load setup often covers lighting, the fridge, internet, a few power points and selected kitchen appliances. For some households, it may also include a garage door, security system, home office or a small split-system air conditioner. It does not automatically mean the oven, ducted air conditioning, pool pump and EV charger will stay on.
Choose critical loads by consequence, not convenience
The best question is not, “What would be nice to have?” It is, “What creates a real problem if it is off for four, eight or 24 hours?”
A fridge and freezer prevent food spoilage. Lighting makes the home safe after dark. The NBN box, router and a power point can keep phones, work devices and communications going. If anyone relies on medical equipment, that requirement should lead the conversation, with appropriate professional advice and an emergency plan that does not rely on a home battery alone.
Think through how your household behaves during outages. A young family may prioritise the fridge, lights, internet and a microwave. A work-from-home household may need office power and reliable communications. A rural or outer-metro property may put more value on a bore pump, security gate or wastewater system. During a hot South Australian summer, a bedroom split system can be worth including, but it changes the required inverter output and battery runtime considerably.
Avoid treating “critical” as a label for every circuit you would prefer to retain. The more load you place on backup, the harder the system must work and the quicker stored energy disappears.
Start with the loads that make sense
Most homes begin with a focused, high-value group of circuits:
- Fridge and freezer circuits
- Selected lighting circuits
- Internet, communications and security equipment
- General power points for phone charging, a kettle, microwave or home office
- Garage door, alarm, or an essential pump where applicable
That is why circuit selection needs to be paired with a conversation about household habits. A backed-up kitchen power-point circuit is useful, but it may need sensible load management during an outage. You might boil the kettle, then run the microwave, rather than firing up every bench appliance at once.
Appliances that need a closer look
High-draw appliances are not automatically off limits. They simply need proper sizing and clear expectations.
Electric ovens, induction cooktops, ducted reverse-cycle air conditioning, pool pumps, spa heaters, electric resistance hot water and EV chargers can consume energy quickly. Some also need high starting current. Including them may call for a larger hybrid inverter, more battery capacity, phase-specific design or a whole-home backup arrangement.
A pool pump might be left out of blackout backup but scheduled to run from excess solar on normal days. An EV charger may be ideal for low-cost overnight charging or solar charging, yet excluded from emergency circuits so it cannot flatten the battery. This is not a compromise in performance - it is smart load prioritisation.
Battery capacity and inverter power are different jobs
One of the biggest buying mistakes is looking only at battery kilowatt-hours. Battery capacity tells you how much energy is stored. Inverter output tells you how much power can be delivered at one time.
For example, a 10 kWh battery may have enough energy to run a fridge, lights and internet through the night. But if its inverter can supply 5 kW and the household switches on a kettle, microwave and air conditioner together, the system may reach its output limit. It may shut down the backup supply or refuse the extra load to protect the equipment.
The reverse can also happen. A large inverter can handle substantial appliances, but a small battery can be depleted quickly. A 15 kWh battery running a continuous 3 kW load has a very different runtime from the same battery supporting a fridge, lights and Wi-Fi averaging a few hundred watts.
Your installer should assess both figures alongside surge demand. Fridges, pumps and air conditioners can draw more power briefly when their motors start. A quality hybrid inverter and correctly planned critical-load board account for these real-world peaks, not just the appliance label’s average consumption.
Single-phase and three-phase homes need different planning
Three-phase homes deserve an extra check before choosing backup loads. A three-phase supply may divide circuits across phases, and not every battery inverter backs up all phases in the same way. Some configurations support selected single-phase circuits only; others can provide three-phase backup when paired with compatible equipment and an appropriate design.
This matters when your essential loads are spread around the home. Your fridge may sit on one phase while the lights or internet circuit sits on another. Simply buying a large battery does not guarantee every selected circuit will remain live in a blackout.
Ask which phases are backed up, what backup power is available per phase, and whether any appliances must be moved to a protected circuit. This is where a site assessment earns its keep. The right arrangement can provide excellent resilience without paying for an oversized system that does not match the switchboard.
Plan for solar during an outage, but do not overpromise
A compatible solar-and-battery system can recharge from solar during a daytime outage, extending your independence well beyond the battery’s overnight runtime. That is a major advantage in a long blackout. However, solar production changes with weather, roof orientation, shade and the season.
Your battery also needs enough room to accept daytime solar. If it was fully charged before the outage, the system may initially have limited space for generation until household loads use some energy. In winter or on a cloudy day, output may be modest. Treat outage solar as valuable support, not an unlimited power source.
It is also worth checking backup transfer behaviour. Some systems restore supported circuits very quickly after a grid failure, while others have a short interruption. Sensitive equipment such as desktop computers, fish tanks or certain medical devices may need additional protection or a separate uninterruptible power supply.
Make the decision before the cables are run
The cleanest time to choose critical loads is during system design. Your electrician can inspect the switchboard, identify circuit demands, confirm inverter compatibility and create a protected-load arrangement that meets Australian electrical requirements. Retrofitting backup circuits later is possible, but it can add labour, switchboard work and avoidable cost.
Bring a simple household priority list to the discussion: essential for safety and food, essential for work or care, useful but optional, and never needed in an outage. Also note major loads you are happy to manage manually. That gives the installer a real brief instead of a vague request for “backup power”.
At OG Trade, the goal is not to sell the biggest battery on paper. It is to match battery capacity, inverter output and backup design to the way your home actually runs - whether that means essential-circuit protection or a higher-capacity system built for more serious independence.
A good critical-load design should feel boring when the lights go out: the fridge stays cold, the Wi-Fi stays on, the house remains safe, and everyone knows which big appliances can wait until the grid returns.